Why Are Air Valves Essential in Municipal Water Supply Pipelines?
2026-11-19
Air inside a water pipeline is easy to overlook. Unlike a leaking pipe or a damaged valve, trapped air is not always visible from outside the system. However, if it is not properly managed, it can affect pipeline performance and create operating problems.
This is particularly important in municipal water supply systems, where pipelines may extend over long distances and pass through areas with changing elevations.
During pipeline filling, air needs to escape. During normal operation, small amounts of accumulated air may need to be released. When a pipeline is drained or pressure drops, air may also need to enter the system to prevent excessive vacuum conditions.
This is where air valves become important.
For water utilities, engineering contractors and municipal water valve distributors in Southeast Asia, understanding the different types of air valves and their applications is an important part of water pipeline design and equipment procurement.

1. Why Does Air Accumulate Inside Water Pipelines?
Air can enter or accumulate inside a water supply pipeline in several ways.
When a new pipeline is filled with water, the air already inside the empty pipe needs to be discharged. During operation, dissolved air in the water may also separate and collect at certain points.
Changes in pipeline elevation make the situation more complicated. Air naturally moves towards higher points in the pipeline, where it can accumulate if there is no suitable means of release.
Common causes include:
Initial filling of a new pipeline
Air carried into the system during pumping
Release of dissolved air from water
Changes in pipeline elevation
Pipeline drainage and maintenance
Pump shutdown or sudden pressure changes
If air remains trapped, it may reduce the effective flow area, increase energy losses and contribute to unstable hydraulic conditions. Air movement and compression can also contribute to pressure surges.
Research published in Water discusses how trapped air and air exchange during pipeline operation and drainage can influence transient pressure conditions.
For this reason, air management should be considered during pipeline design, not treated as an afterthought.
2. What Does an Air Valve Do?

An air valve is a mechanical device installed on a pipeline to control the movement of air into and out of the water system.
Depending on its design, it can perform one or more of the following functions:
Release large volumes of air when a pipeline is being filled
Discharge small quantities of accumulated air while the pipeline is operating under pressure
Admit air when a pipeline is being drained or when negative pressure develops
The purpose is to help maintain suitable operating conditions and reduce risks associated with trapped air or vacuum formation.
However, not all air valves perform the same function. Selecting the correct type is essential.
3. Three Common Types of Air Valves Used in Water Supply Systems
3.1 Air Release Valve

An air release valve is designed to discharge small quantities of accumulated air while the pipeline is operating under pressure.
As air collects inside the valve chamber, the water level falls and the float moves down, opening the discharge orifice. Once the accumulated air has escaped and water enters the chamber, the float rises and closes the opening.
This type of valve is generally used to remove air that gradually accumulates during normal pipeline operation.
Typical applications include:
Municipal water distribution networks
Water transmission pipelines
Water treatment facilities
Pumping station pipelines
An important point for buyers: a standard small-orifice air release valve is not designed to discharge the large volume of air required during initial pipeline filling.
3.2 Air and Vacuum Valve

An air and vacuum valve is designed to handle larger volumes of air.
During pipeline filling, it allows a large quantity of air to escape as water enters the pipeline.
When the pipeline is drained or the internal pressure falls below atmospheric pressure, the valve allows air to enter.
This helps reduce the risk of excessive negative pressure, which may damage certain pipeline systems.
Typical applications include:
Long-distance water transmission pipelines
Large-diameter water mains
Pumping station discharge lines
Pipelines with significant elevation changes
Unlike a small-orifice air release valve, an air and vacuum valve generally does not release small accumulated air pockets while the pipeline remains under normal positive operating pressure.
3.3 Combination Air Valve

A combination air valve brings together the functions of an air release valve and an air and vacuum valve.
Depending on its design, it can:
Release large volumes of air during pipeline filling.
Discharge smaller amounts of accumulated air during normal operation.
Admit air when the pipeline is drained or negative pressure develops.
This makes combination air valves a practical option for many municipal water transmission and distribution applications.
For buyers, it is important to check whether the selected product actually provides all three functions and whether its orifice sizes and pressure range suit the project.
4. Where Should Air Valves Be Installed?

The installation position is just as important as the valve itself.
Air valves are commonly considered at locations where air is likely to collect or where air needs to enter the pipeline during drainage.
Typical installation locations include:
Pipeline high points
Air tends to accumulate at elevated sections of a pipeline. Air valves are therefore commonly installed at appropriate high points identified in the pipeline profile.
Long transmission pipelines
Long pipelines may have several changes in elevation. Engineers need to assess the profile to determine suitable air valve locations.
Upstream or downstream of pumping facilities
Pumping operations can introduce air and create changing pressure conditions. Air valve arrangements should be considered as part of the overall hydraulic design.
Locations where pipeline drainage is required
When water is discharged from a pipeline, air may need to enter to replace the drained water and reduce vacuum risk.
The City of San Diego's water facility design guidelines and the US Department of Agriculture's engineering technical note both discuss air valve placement and pipeline protection considerations.
One important reminder: air valves should not be installed at fixed intervals simply because a pipeline is long. Their locations and sizes should be determined by the pipeline profile, operating conditions and hydraulic calculations.
5. What Should Buyers Consider When Selecting Air Valves?
For distributors, contractors and project procurement teams, selecting an air valve requires more than confirming the nominal diameter and pressure rating.
The following technical details should be reviewed before ordering.
1. Valve Type
First, identify the required function.
Is the valve intended to release small amounts of air during operation, discharge large volumes during pipeline filling, admit air during drainage, or perform all these functions?
This determines whether an air release valve, air and vacuum valve or combination air valve is appropriate.
2. Nominal Diameter and Connection
Confirm the valve inlet size and pipeline connection requirements.
For flanged products, buyers should provide the required flange standard, drilling dimensions and connection details.
3. Working Pressure
The valve's pressure rating must match the system requirements.
Buyers should confirm the normal working pressure, maximum operating pressure and any special pressure conditions specified in the project documents.
4. Body and Internal Materials
Common material options for municipal water air valves include:
Body: Ductile Iron
Float: Stainless Steel or other specified material
Internal components: Corrosion-resistant materials
Sealing elements: EPDM or other suitable elastomers
Fasteners: Stainless Steel or project-specified materials
The actual configuration depends on the valve design and water service conditions.
5. Coating and Corrosion Protection
In Southeast Asian projects, environmental conditions deserve attention.
High humidity, rainfall, outdoor exposure and underground installation can influence corrosion protection requirements.
Buyers should confirm the coating system, coating thickness, surface preparation and inspection criteria specified by the project.
6. Testing and Documentation
Before placing an order, buyers should confirm the applicable testing standard and documentation requirements.
These may include:
Product technical datasheet
General arrangement drawing
Material Test Certificate
Pressure test report
Dimensional inspection report
Coating inspection record
Installation and maintenance instructions
For drinking water applications, any required material or product approvals should also be checked against the project and local regulatory requirements.
6. Common Mistakes in Air Valve Procurement
Even when the product description appears correct, some purchasing mistakes can cause problems during installation or operation.
Mistake 1: Choosing only by DN and PN
Two air valves with the same nominal size and pressure rating may have different orifice designs and operating functions.
Mistake 2: Confusing air release valves with air and vacuum valves
A small-orifice air release valve cannot automatically replace a large-orifice air and vacuum valve.
Mistake 3: Ignoring the pipeline profile
The correct installation location depends on elevation changes and hydraulic conditions, not simply the distance between pipeline sections.
Mistake 4: Overlooking installation environment
Valve chambers may be exposed to flooding or standing water. The installation arrangement should prevent contaminated external water from entering the drinking water pipeline.
Ontario's drinking-water system design guidance specifically addresses air valve installation, chamber flooding and discharge arrangements.
Mistake 5: Failing to confirm the project standard
Buyers should check the required design, flange and testing standards before production. Different standards should not be assumed interchangeable.
7. GTF – Municipal Water Valve Manufacturer in China

GAOTE HOLDING GROUP CO., LTD. (GTF) is a valve manufacturer based in Quanzhou, Fujian, China.
GTF develops and manufactures valve products for municipal water supply, pipeline systems and other fluid control applications.
Our waterworks valve product range includes:
Gate Valves
Butterfly Valves
Check Valves
Air Valves
Ball Valves
Other Pipeline Valve Products
For water supply projects in Southeast Asia and other international markets, product selection should be based on the actual pipeline conditions and project specifications.
GTF can discuss product configurations with buyers, including valve type, DN, PN, material selection, flange dimensions, coating and testing requirements.
We welcome enquiries from municipal water valve distributors, engineering contractors, water treatment equipment suppliers and project procurement teams.
Looking for air valves or other municipal water valves for your next project?
Contact GTF to discuss your technical requirements and request a quotation.
GAOTE HOLDING GROUP CO., LTD.
Website: www.gaotejituan.com
Email: gaotegroup@126.com
WhatsApp: +86 13400888017
Previous:
Contact Us
Email:
Tel/WeChat:
Address:
Chenggong Development Zone, Ximei Street, Nan'an City, Quanzhou City, Fujian Province