Return to List

PED 2014/68/EU Voluntary Compliance Review | GTF Gaote Pressure Equipment Technical Documentation Verified by ECM

GTF Gaote’s full‑range industrial valves have passed voluntary technical‑document review by Notified Body ECM against EU PED 2014/68/EU Module H. Wide DN‑PN coverage for gate, butterfly, ball, globe, check valves and more for European fluid‑control projects.

2026-08-17

PED 2014/68/EU Voluntary Compliance Review | GTF Gaote Pressure Equipment Technical Documentation Verified by ECM

Introduction

For industrial valve suppliers targeting the European market, compliance with the Pressure Equipment Directive (PED 2014/68/EU) is a core prerequisite for project tendering, customs clearance and long‑term operational safety. Engineering buyers, EPC contractors and system integrators pay close attention to whether manufacturers possess complete technical documentation and quality‑management capabilities that satisfy EU pressure‑equipment safety requirements.
 
GTF (Gaote Holding Group Co., Ltd.) has obtained the voluntary compliance certificate reviewed by Ente Certificazione Macchine (ECM, Italy), certificate No. 0P220915.GHGQQ48, valid from Sep 15, 2022 to Sep 14, 2027. ECM completed comprehensive assessment of our pressure‑equipment technical files under PED 2014/68/EU Module H (Full Quality Assurance mode). All submitted technical documents meet the basic safety requirements of the EU Pressure Equipment Directive.
Important note: This is a voluntary technical‑document review certificate issued by ECM. It does not replace the manufacturer’s self‑issued EC Declaration of Conformity (DoC). To place products on the EU market, GTF will complete CE marking and issue the required EC DoC in accordance with PED regulatory rules. Certificate authenticity can be verified via ECM official website: www.entecerma.it.
 

Scope of Products Covered by ECM PED Review

This review covers our complete portfolio of fluid‑control products, with broad nominal size and pressure ranges for general industrial, water‑supply, HVAC and process piping applications:

 

Product CategoryNominal SizeNominal Pressure
Gate ValveDN15‑DN1000PN10‑PN40
Butterfly ValveDN40‑DN4000PN10‑PN40
Check ValveDN15‑DN600PN10‑PN40
Hydraulic Control ValveDN40‑DN400PN10‑PN40
Air Release ValveDN15‑DN300PN10‑PN25
Expansion JointDN40‑DN4000PN10‑PN40
Ball ValveDN15‑DN2200PN10‑PN40
Globe ValveDN15‑DN400PN10‑PN40
Flow & Pressure Regulating ValveDN50‑DN2400PN10‑PN40
FilterDN15‑DN600PN10‑PN40

 

From small‑bore pipeline accessories to large‑diameter heavy‑duty process components, our technical documentation system is built to align with EU pressure‑equipment safety specifications.

What Module H Full Quality‑Assurance Mode Means for Your Project

Module H under PED 2014/68/EU focuses on full‑lifecycle quality assurance, covering product design, material traceability, production control and final factory inspection.
During ECM’s assessment, our complete quality management workflow was audited:
  • Design validation and risk assessment for pressure‑bearing components
  • Material traceability and raw‑material incoming inspection procedures
  • Manufacturing process control for casting, machining and assembly
  • Hydrostatic shell test, sealing performance test and sampling verification
  • Technical‑file compilation, mark management and post‑delivery traceability
Most manufacturers only handle final‑product testing. GTF’s Module‑H‑aligned system means safety‑oriented controls run through every phase of valve production. This greatly reduces compliance risks for European‑bound projects and simplifies third‑party audit work for our clients.

Key Clarification on Certification & CE‑Marking

Many international purchasers confuse voluntary document review with mandatory PED product certification. We clarify the commercial‑use rules strictly for transparency:
  1. This ECM certificate is voluntary technical‑document review, not a mandatory PED product‑approval certificate. It proves our technical files comply with PED safety requirements.
  2. CE marking for pressure equipment shall be implemented by GTF as the original equipment manufacturer. We will issue the self‑responsible EC Declaration of Conformity (DoC) as required before goods enter EU territory.
  3. The ECM voluntary review logo can be printed on catalogues, datasheets and web‑page materials. It shall NOT be directly used as the CE mark stamped on valve nameplates.
  4. The whole assessment follows ECM internal specifications RCC_ECM rev.0 and RG01_ECM rev.3. All interpretation shall refer to official ECM documents.

 

Project‑Side Benefits for European‑Market Partners

When you select GTF valves for EU‑located fluid‑control projects, you obtain tangible compliance advantages:

1.Audit‑Ready Technical Documentation

Our technical files have been reviewed by a notified‑body organization. Documentation structure matches PED expectations, lowering obstacles during tender evaluation and third‑party audits.

2.Broad Product‑Range Coverage

One review covers gate, butterfly, ball, globe, check valves, filters, expansion joints and more. You can source multiple pipeline components from one compliant supplier.

3.Full‑Lifecycle Quality‑Assurance System

Built‑upon Module‑H requirements, our factory controls design, material, production and final testing. Stable product performance reduces on‑site failure and maintenance costs.

4.Support for Complete EU Market Access

We can cooperate with customers to sort out required technical materials, and issue manufacturer EC DoC to finish formal CE‑marking procedures for shipment to Europe.

 

Frequently Asked Questions

 

Q1: Is this ECM document a mandatory PED certificate for valves?

A: No. This is voluntary technical‑document verification. PED mandates that the manufacturer completes CE marking and releases the EC Declaration of Conformity (DoC). This ECM review serves as solid pre‑verification of our technical foundation.

 

Q2: Can I verify this certificate online?

A: Yes. Go to ECM official site www.entecerma.it and input certificate number 0P220915.GHGQQ48 to check validity. Valid period: Sep‑15‑2022 to Sep‑14‑2027.

 

Q3: Which industries can apply these PED‑reviewed valves?

A: Suitable for municipal water networks, HVAC systems, general chemical plants, power‑plant auxiliary piping and industrial circulating‑water projects across European countries.

 

Q4: Can GTF provide DoC documents for EU customs clearance?

A: Yes. Based on order‑specific product parameters, GTF can prepare the manufacturer’s EC Declaration of Conformity to satisfy EU market‑access requirements.

Get In Touch

If you need datasheets, ECM compliance documents, project quotation or support for EU‑market compliance preparation, reach out to our engineering‑sales team.

Website: www.gaotejituan.com

Email: gaotegroup@126.com

Phone: +86‑595‑88968800

GTF keeps focusing on standardized manufacturing, supplying well‑documented industrial‑valve solutions for global fluid‑control projects.